Product Information
Description
1. Product Introduction
Graphene Oxide (GO) is an oxidized derivative of graphene consisting of carbon-based nanosheets decorated with oxygen-containing functional groups, including hydroxyl, epoxy, and carboxyl groups. These surface functionalities distinguish graphene oxide from pristine graphene and contribute to its hydrophilicity, chemical reactivity, and ability to form aqueous dispersions.
The 4 mg/mL water dispersion is a liquid formulation designed for research applications that require graphene oxide in a readily processable aqueous medium. Its oxygen-containing groups support interactions with polymers, biomolecules, metal ions, and other functional materials, making it useful for surface modification, composite preparation, and nanomaterial research.
According to the corresponding STREM product information, the dispersion has a yellow-brown appearance, a pH of approximately 2.2–2.5, and variable sheet dimensions. The reported monolayer content is greater than 95% when measured at 0.5 mg/mL. At the supplied concentration of 4 mg/mL, graphene oxide sheets may agglomerate; dilution followed by mild sonication can help improve dispersion and monolayer content.
2. Chemical Properties & Reaction Mechanism
2.1 Oxygen-Containing Functional Groups
Graphene oxide contains oxygen-bearing groups distributed across its basal plane and edges. These commonly include hydroxyl, epoxy, carbonyl, and carboxyl groups. Their distribution and abundance depend on the oxidation and preparation method.
2.2 Aqueous Dispersibility
The oxygen-containing groups increase the hydrophilicity of graphene oxide and promote interactions with water. Surface charge and hydrogen bonding contribute to the stability of aqueous dispersions. However, concentration, pH, ionic strength, and storage conditions can influence aggregation.
2.3 Chemical Reduction
Graphene oxide can be chemically or thermally reduced to produce reduced graphene oxide (rGO). This process removes some oxygen-containing functional groups and partially restores the conjugated carbon network.
General transformation:
Graphene Oxide → Reduced Graphene Oxide + Oxygen-Containing By-products
Reduction generally increases electrical conductivity while changing dispersibility and surface chemistry.
3. Key Research Applications
3.1 Graphene-Based Composite Materials
Graphene oxide is used as a functional nanofiller and surface-modifiable component in polymer and inorganic composites.
Applications include:
Graphene oxide/polymer composites
Polymer reinforcement research
Functional coating development
Nanocomposite membrane preparation
Hybrid carbon-based materials
Its surface functional groups can improve interactions with compatible polymer matrices and other nanomaterials.
3.2 Energy Storage and Conversion
Graphene oxide and its reduced derivatives are investigated as components or precursors in electrochemical materials.
Applications include:
Lithium-ion battery materials
Sodium-ion battery research
Supercapacitor electrodes
Lithium-sulfur battery materials
Fuel-cell component development
Reduction and composite formation can modify electrical conductivity, surface area, and electrochemical behavior.
3.3 Membranes and Separation Materials
The layered structure and oxygen-containing functional groups of graphene oxide make it useful in membrane and separation research.
Applications include:
Graphene oxide membrane fabrication
Water purification membrane research
Selective molecular transport studies
Gas separation materials
Low-permeability composite coatings
Interlayer spacing, surface chemistry, and membrane processing conditions influence transport and separation properties.
3.4 Sensors and Biomedical Materials Research
Graphene oxide is investigated as a functional platform for surface modification, molecular interactions, and sensor development.
Applications include:
Electrochemical sensor development
Biosensor research
Biomolecule immobilization
Fluorescence-based detection platforms
Graphene-based biomedical material research
Its surface chemistry allows further functionalization, although biological compatibility and safety must be evaluated for each formulation and application.
4. Advantages
Aqueous Formulation: Supplied as a 4 mg/mL water dispersion for convenient liquid-phase processing.
Functional Surface Chemistry: Oxygen-containing groups provide sites for chemical modification and material interactions.
Two-Dimensional Structure: Graphene oxide nanosheets offer a high-aspect-ratio structure for composite and membrane research.
Composite Compatibility: Suitable for investigating interactions with polymers, inorganic materials, and other nanomaterials.
Reduction Potential: Can be converted into reduced graphene oxide for research requiring modified electrical properties.
Broad Research Applications: Relevant to energy storage, membranes, sensors, coatings, and functional composites.
Ready-to-Use Dispersion: Avoids the initial powder-dispersion step, although dilution and mild sonication may be needed before use.
5. Storage & Handling
Store in a tightly sealed container under the supplier-recommended conditions.
Protect the dispersion from contamination, evaporation, and prolonged exposure to unsuitable temperatures.
Avoid introducing incompatible chemicals or electrolytes that may destabilize the dispersion.
Mix gently before use if sedimentation or concentration gradients are observed.
If higher monolayer content is required, dilute the dispersion and apply mild sonication according to the experimental protocol.
Avoid excessive sonication, which may reduce sheet dimensions or alter material properties.
Wear suitable gloves, protective clothing, and safety goggles when handling.
Avoid generating aerosols and prevent accidental ingestion or direct contact with eyes.
Handle nanomaterial-containing waste according to institutional and local hazardous-waste procedures.
Consult the product-specific SDS for detailed hazard classification and storage requirements.
6. Research Areas
Graphene Materials Science: Investigation of graphene oxide structure, surface chemistry, and functional properties.
Energy Storage: Development of graphene-based electrode materials for batteries and supercapacitors.
Polymer Engineering: Preparation of graphene oxide/polymer composites and reinforced functional materials.
Membrane Technology: Development of layered membranes for filtration, separation, and molecular transport.
Environmental Materials: Research into adsorbents and nanocomposites for contaminant removal.
Sensor Technology: Development of electrochemical and biosensing platforms using functionalized graphene oxide.
Biomedical Materials Research: Investigation of graphene oxide-based carriers, coatings, and biomaterial interfaces.
FAQ
Q1: What is Graphene Oxide?
A: Graphene Oxide is an oxidized graphene derivative containing oxygen-based functional groups, such as hydroxyl, epoxy, and carboxyl groups, on its nanosheet structure.
Q2: What is the CAS number of Graphene Oxide?
A: The CAS number associated with this product is 1034343-98-0.
Q3: What does 4 mg/mL water dispersion mean?
A: It means the aqueous formulation contains 4 milligrams of graphene oxide per milliliter of dispersion.
Q4: What is the molecular formula of Graphene Oxide?
A: Graphene Oxide does not have a fixed molecular formula. Its composition is commonly represented as CₓHᵧOᵤ because the carbon-to-oxygen ratio varies with the oxidation process.
Q5: What is the appearance of this Graphene Oxide dispersion?
A: The corresponding STREM product is described as a yellow-brown liquid dispersion.
Q6: What is the reported pH of this 4 mg/mL dispersion?
A: The STREM product information reports a pH of approximately 2.2–2.5. Actual values should be confirmed against the batch-specific specification.
Q7: Does this product contain predominantly monolayer graphene oxide?
A: The supplier reports greater than 95% monolayer content when measured at 0.5 mg/mL. This figure should not be interpreted as the monolayer percentage at the undiluted 4 mg/mL concentration.
Q8: Why may dilution and sonication be required?
A: At 4 mg/mL, graphene oxide sheets may agglomerate. Dilution followed by mild sonication can help improve dispersion and increase the proportion of individually dispersed sheets.
Q9: Can Graphene Oxide be converted into Reduced Graphene Oxide?
A: Yes. Chemical or thermal reduction can remove some oxygen-containing groups and partially restore the conjugated carbon structure, producing reduced graphene oxide (rGO).
Q10: What are the main applications of Graphene Oxide?
A: Major research applications include graphene-based composites, batteries, supercapacitors, membranes, sensors, solar cells, and functional nanomaterials.
